10 Plumbing Tips Everyone Should Know

Here are basic plumbing secrets that every homeowner should identify. Maybe one of these tips will save you a lot from a costly visit of an expert:

1. Know the place of the shut-off valves – just before moving into the new house, note the place of your main drains and shut-off valves. You must be acquainted with the sewer line access place, in case you want to conduct periodic cleaning-outs. Note that condos and apartments will not have their personal dedicated shut-off valve.

2. Do not puncture the pipes – do you have plans of pound nails or drilling holes into your floors, ceiling or walls? First, determine when there are any drainage pipes or supplies behind the work area, because you do not want to puncture them by accident. You can locate the pipes behind your walls with the affordable stud finder. On the other hand, you should invest in the endoscopic camera that may be snaked in the walls.

3. What cannot be flushed down your toilet – homeowners should not use the toilets as their trash can, because flushing anything aside from the toilet paper will lead to nasty clogs and even the “flushable” baby wipes will back up the method!

4. Do not place the trash down your drain – remember to not dump coffee grounds, bacon grease, food debris, vegetable peelings, or some other starchy foods such as potatoes or rice down your kitchen drain; they can almost certainly clog the pipes. It is also clever to read the manual of the manufacturers for the garbage disposal to be aware of what, exactly, your unit can handle.

5. Take the Plunge – spend in the top-quality of plungers for clearing clogs in toilets, drains and sinks. If you have plans of cleaning the sink traps, use the plunger to push lots of water out before taking out a trap. The task can be with lesser mess and wet.

6. Pull out a vacuum – when you are attempting to dislodge the clog caused by those hard, small objects, rely on what your wet-dry vacuum. It is more efficient to suck out an object. The plunger will just push it deeper in the drain, which will make it harder to remove.

7. Do not ignore leaks – those steady drips of the fixture symbolize your money going under your drain. The truth is the leaky faucet normally wastes up to 8 gallons of water in a day, while the running toilet will waste 200 gallons in a day. Fix the small leaks in time before they become your costly and big problems.

8. Never over tighten the fittings – the common DIY plumbing mistakes are over-tightening connections and fittings that lead to stripped screws and broken bolts. Remember this adage: “the hand-tight will be right.”

9. Make friends with the plumber’s tape – the plumber’s tape or Teflon tapes are used in sealing pipe threads to shun from leaks around fittings and joints. You must normally wrap the plumber’s tape 3x around a pipe thread before sealing. Remember that white tapes are styled for the common household projects of plumbing, while the yellow is for the gas line connections.

10. Check the leaks – right after every plumbing project, remember to check the leaks by running the water through its system, then open and close all drains and valves. Even professional plumbers will a tiny leak and have to reseal the connection.

Leave a Reply

Your email address will not be published.